3. Description of the appliance
3.1 Description of the appliance
The coffee grinder has been realized considering the actual requirements of a modern
and articulated way of working in the coffee shop; concerning this, it has been
conceived to obtain a correct grinding of the coffee beans and an appropriate dosing.
Description:
Stainless steel or varnished steel sheet bearing structure.
Hardened steel blades unit.
Plastic hopper fit for contact with food.
Light aluminium alloy dosing unit provided with dose adjustment device.
Power supply in conformity with the 2006/95/EEC Directives.
Control unit for resetting coffee doses ( AUTOMATIC mod.).
1 - Coffee beans hopper.
2 - Hopper closing hatch.
3 - TIMER switch (TIMER mod.).
3 - Illuminated ON/ OFF switch (AUTOMATIC and MANUAL mod.).
4 - Dose adjusting pin.
5 - Blade adjusting ring.
6 - Dosing lever.
7 - Control unit for resetting coffee doses included in the cover
of the dosing container (AUTOMATIC mod.).
3.2 Description of the controls
The coffee grinder is provided with the following control devices:
- Hopper closing hatch (2)
- TIMER switch (3) (TIMER mod.)
- Illuminated ON/OFF switch (3) (AUTOMATIC/ MANUAL mod.)
- Dose adjusting pin (4)
- Blade adjusting ring (5)
- Dosing lever (6)
3.3 Emergency stop controls
In compliance with the specifications indicated in the EN 418 standard, the
coffee grinder is not provided with an emergency stop because this function
is executed by the TIMER switch (TIMER mod.) and by general switch ON/OFF
(only for MANUAL and AUTOMATIC mod.).
3
To Next Page
Loading...
