APF-16 16” PROFALLS WATERFALL
Adds mechanical and biological filtration
Part Number: APF-16
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement parts.
• Estimated Assembly Time: 45 minutes
• Tools required for assembly: Carpenter’s level, marker,utility knife, temporary nail, philipshead,
screwdriver and hacksaw.
This waterfall is specifically design to maximize the natural processes that remove ammonia from the
water. Water pumped into tank brings the dissolved wastes into contact with bacterial colonies on the
many surfaces of the filter pad and bio ball. These colonies digest, or metabolize the ammonia. Some
types of bacteria turn it into nitrites; others take the still toxic nitrites and dissolved oxygen and turn them
into less toxic nitrates, a natural fertilizer that is easily taken up by plants. When water flows back into a
pond as a waterfall, it aerates the water. Pond maintenance is easier when the proper balance of fish,
plants and aerations is reached. This waterfall spillway is designed to work with a water pump that can
circulate 1,200 to 3,750 gallons per hour.
CALL 1-800-553-5605
BEFORE RETURNING TO STORE.
Questions, problems, missing parts? Before returning
to your retailer, call our customer service department at
1-800-553-5605, 8 a.m. - 4 p.m. CT, Monday-Friday, or
email us at info@anjonponds.com. Or visit our website
www.AnjonMFG.com.
PLEASE CALL 1-800-553-5605 BEFORE RETURNING TO THE STORE.
WWW.ANJONMFG.COM
Need help?
General
To Next Page