EasyManua.ls Logo

Anjon APF-16 - Care and Maintenance; Replacement Parts List

Anjon APF-16
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CARE AND MAINTENANCE
Before cleaning, always disconnect the pump connected to this waterfall spillway from the power
source.
Occasional cleaning of the filter pads will be necessary to ensure the proper functioning of t
he
system. The filter pad is a designed to trap debris and particles. Filter pads should be removed and
w
ashed with clean water when they are visibly soiled.
Filter pads should be replaced annually. The exterior surface of the cover may als
o need
o
ccasional cleaning. Particularly if the openings in the top of the cover are obstructed. Whe
n
cleaning the cover use warm water only. Do not use any chemicals that may destroy the beneficial
bacteria.
The bio media balls in you filter system and the inside surfaces of the waterfall spillway contain t
he
beneficial bacteria. At least once a year the entire system should be disassembled and cleaned
t
horoughly using warm, soapy water (mild detergent). This should not be done during the warm
season as it may take up to 8 weeks to re-establish the environmental balance. The best time of
the year to “breakdown” your system is in early spring before the water temperatures begin to rise.
This is also the ideal time to replace the filter pads.
REPLACEMENT PARTS LIST
F
or replacement parts, call our customer service department at 1-800-553-5605, 8 a.m.- 4 p.m., CT,
Monday-Friday, or email us at info@anjonponds.com.
Part
Description
A
Tank
B
Coupler
C
Gasket
D
Adapter
E
Bio Media Balls with Bag
F
Filter Pad
G
Clip
H
Cover
I
Anchoring Flange
J
Screw
PLEASE CALL 1-800-553-5605 BEFORE RETURNING TO THE STORE.
WWW.ANJONMFG.COM