12. Place the filter pad over bio media ball bags and tank. Fig. 12
Fig. 12
13. Slide 2 clips to cover, then snap them to tank. Fig. 13
Fig. 13
14. Connect tubing to the outlet adapter, then use hose clamp to
hold it tight. Connect other side to your pump, and use hose
clamp hold it tight too. Carefully cover the waterfall spillway
and tubing with natural material for a professional look.
Fig. 14
NOTE: Tubing, hose clamp and pump are NOT INCLUDED.
Fig. 14
15. Connect pump to a proper power source. Fig. 15
NOTE: Pump is NOT INCLUDED.
Fig. 15
PLEASE CALL 1-800-553-5605 BEFORE RETURNING TO THE STORE.
WWW.ANJONMFG.COM
To Next Page