Anker A1761 - Connecting with an Expansion Battery; Anker App for Smart Control; Light; Ambient light

• When powered on, press the main power button to turn the screen on or o.
• The screen will automatically turn o after 30 seconds of lighting up. The auto-o time can be set in the Anker app.
• With the output buttons turned o and no other loads for 12 hours, the power station will power o automatically.
The standby duration can be set in the Anker app.
Powering Your Devices
AC Charging
Press the AC outlet button and connect your device with the AC output ports.
The AC outlets can intelligently identify whether a plug is inserted. This helps prevent power waste by automatically turning
o the power station if no plug is detected for more than 15 minutes.
On / O
USB Charging
Connect your devices to the USB ports.
Car Socket Charging
Turn on the car socket and connect your devices to start charging.
On / O
Uninterruptible Power Supply (UPS)
To use the UPS feature, connect your power station to a wall outlet with the AC charging cable, then press the AC outlet button and connect
your devices via the AC output ports.
On