5
After pairing for the first time, your device will connect to the
keyboard automatically when turning on the keyboard. To pair with
a different device, simultaneously press the Fn and Bluetooth keys to
enter pairing mode, and repeat the above instructions.
Note: In case of connection failure, delete the pairing record from
your device and repeat the instructions above.
Power Saving Mode
After being idle for 30 minutes, the keyboard will enter sleep mode.
To wake it, press any key and wait for 2 seconds.
Charging Instructions
When the battery power is low, the indicator light will turn blue and
begin to flash, indicating that it is time to replace the batteries.
To Next Page
Loading...
