Use the “Mounting Guide” function, found at the end of the setup process
or under Camera Settings > Mounting Guide, to test the wireless signal
strength of eufyCam 2C at the location you wish to mount the camera.
Move the camera as close to the HomeBase 2 as possible if the wireless
signal strength is poor.
Hang eufyCam 2C 7-10 ft (2-3 m) above the ground. This height
maximizes the detection range of the motion sensor of eufyCam 2C.
Avoid placing eufyCam 2C under direct sunlight.
Find a Good Mounting Spot
05
MOUNTING
THE CAMERA
05 06
Height and Location
Up to 30ft (10m)
7-10 ft
(2 - 3 m)
Motion
Detection
Zone
Camera field
of view
To Next Page
Loading...
