EN
13
3.
Projector
Press to access the home menu, select [Settings] > [Projector], and
press .
[Image Mode] [Auto] / [Standard Mode] / [Battery Mode]
[Color Temperature]
[Normal] / [Cool] / [Warm]
[Auto Keystone Correction]
Enable / disable auto keystone correction.
[Vertical Keystone
Correction]
When the Auto Keystone Correction is Off,
manually adjust the vertical keystone value.
[Horizontal Keystone
Correction]
When the Auto Keystone Correction is Off,
manually adjust the horizontal keystone
value.
[Quadrilateral Keystone
Correction]
When the Auto Keystone Correction is Off,
manually adjust the quadrilateral keystone
value.
[Auto Focus Correction]
Enable / disable auto focus.
[Projector Mode]
[Front Projection]: The projector is located
in front of the projection surface.
[Rear Projection]: The projector is located
behind the projection surface.
[Inverted Front Projection]: The projector
is hanging from the ceiling in an upside
down position. The image is rotated by
180 degrees.
[Inverted Rear Projection]: The projector is
hanging from the ceiling in an upside down
position behind the projection surface.
The image is rotated by 180 degrees and
horizontally mirrored.
To Next Page
Loading...
