EN
21
Troubleshooting
①
Fail to power on by the remote control?
• Press and hold for 2 to 3 seconds on the projector to turn it on.
• When powered off, you cannot use the remote control to turn it on.
②
The remote control doesn’t work?
• Make sure you remove the plastic battery insulation tab.
• Make sure the battery is already installed in the remote control.
• Replace the batteries.
③
Blurred image?
• Slightly move the projector to engage autofocus.
④
Cannot connect to a Wi-Fi network?
• Refresh the list of available networks and retry.
• Reboot the wireless router or the device and retry.
⑤
How do I update the rmware?
• When a new version is detected you will be asked to reboot and
update.
To Next Page
Loading...
