Specifications
Specifications are subject to change without notice.
Important Safety Information
Avoid dropping.
Do not disassemble.
Do not install near any heat sources.
Do not place any sources of danger on this device (e.g. liquid filled objects, lit candles).
Use original or certified cables.
Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
Do not expose batteries to high heat as direct sun light, fire and or the like.
Notice
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity,
visit the Web site: www.anker.com.
Due to the used enclosure material, the product shall only be connected to a USB Interface of version
2.0 or higher.
Do not use the Device in the environment at too high or too low temperature, never expose the Device
under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is -10~40℃.
When charging, please place the device in an environment that has a normal room temperature and
good ventilation.
It is recommended to charge the device in an environment with a temperature that ranges from 5℃
To Next Page
Loading...
