Need help?Do you have a question about the Anker PowerConf H700 and is the answer not in the manual?
Connect the headset to power via USB-C cable and observe LED indicators.
Connect the charging stand to power and align headset for charging.
Pair the headset with a device via Bluetooth.
Connect the headset to a PC using the USB Bluetooth receiver.
Connect the headset to a second device while already connected.
Control playback, volume, and calls using the rotation button.
Switch between ANC, Normal, and Transparency modes.
Connect the headset to power via USB-C cable and observe LED indicators.
Connect the charging stand to power and align headset for charging.
Pair the headset with a device via Bluetooth.
Connect the headset to a PC using the USB Bluetooth receiver.
Connect the headset to a second device while already connected.
Control playback, volume, and calls using the rotation button.
Switch between ANC, Normal, and Transparency modes.
General| Type | Over-Ear |
|---|---|
| Charging Time | 2 hours |
| Active Noise Cancellation (ANC) | Yes |
| Voice Assistant Support | Yes |
| Charging Port | USB-C |
| Driver Size | 40mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32 Ohms |
| Bluetooth Profiles | A2DP, AVRCP, HFP, HSP |
| Quick Charge | Yes |
| Foldable Design | Yes |
| Ear Cushion Material | Protein Leather |
| Connectivity | Bluetooth |
| Fast Charging | Yes |
| Multipoint Pairing | Yes |
| Microphone Frequency Response | 100Hz |
| Connection Type | Bluetooth |
To Next Page