To Next PageTo Next Page
Need help?Do you have a question about the Anker Soundcore Liberty Neo and is the answer not in the manual?
General| Type | True Wireless |
|---|---|
| Form Factor | In-Ear |
| Connectivity | Bluetooth |
| Wireless Technology | Bluetooth 5.0 |
| Driver Size | 6mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 16Ω |
| Sensitivity | 95dB |
| Bluetooth Range | 10m |
| Battery Life (Earbuds) | Up to 5 hours |
| Battery Life (with Charging Case) | 15 hours |
| Charging Time | 1.5 hours |
| Water Resistance | IPX5 |
| Weight (Each Earbud) | 5.6g |
Select and insert EarTips and jackets for a secure fit; use without jackets if they are too large.
Charge the charging case before first use and place earbuds inside to charge them.
Understand the LED indicators on the charging case for battery level status.
To preserve battery lifespan, fully charge the earbuds at least once every 45 days.
Earbuds automatically power on when removed from the case or manually by holding the multifunction button.
Earbuds automatically power off when returned to the case or manually by holding the multifunction button.
Enter pairing mode to connect the earbuds to your smartphone or other Bluetooth device.
Establish the True Wireless Stereo connection between the left and right earbuds.
Learn to interpret the flashing light patterns indicating TWS connection status.
Manage music playback (play/pause, next/previous track) and adjust volume using earbud buttons.
Control calls (answer, end, reject, hold, transfer) using the multifunction buttons.
Activate voice assistants like Siri by double-clicking the multifunction button on either earbud.
Follow the outlined steps to perform a factory reset on the earbuds for troubleshooting.
View detailed technical specifications including input ratings, playtime, weight, and connectivity.
