EasyManua.ls Logo

anko BL520 - Cleaning and Storage; Technical Specification

anko BL520
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Do not use metal utensils to remove mix from the bowl.
Do not remove the freezer bowl from the freezer until ready to make ice cream.
HINTS
We suggest that you keep the freezer bowl in the freezer so that it is ready for use. Place in a plastic bag
before freezing. Freeze the bowl in the upright position.
Always make sure the freezer bowl is thoroughly dry before placing in the freezer.
Do not puncture or heat the freezer bowl.
The freezer bowl should be placed in a freezer that is operating at a temperature of -18℃ or below for 12
hours before use.
For best results always refrigerate the ingredients before making ice cream.
The addition of alcohol to recipes inhibits the freezing process.
It is a normal phenomenon for the paddle slightly scraping the aluminum wall when the unit is making ice
cream.
CLEANING AND STORAGE
The appliance should be cleaned after each use.
CAUTION!
Always switch off and unplug the appliance, allow all parts of the appliance reach room temperature before
disassembling and cleaning.
Never put the power unit, the freezer bowl in water or let the cord or plug get wet.
Do not wash parts in the dishwasher.
Do not clean with scouring powders, steel wool pads, or other abrasive materials.
1. Wash the inside of the bowl.
2. Wash the lid and paddle with soapy water.
3. Use a moist cloth to clean the power unit and the freezer bowl.
4. Make sure all components are clean and dried thoroughly before storing.
5. Store the appliance upright in a clean and dry location. Do not place anything on top.
TECHNICAL SPECIFICATION
Voltage: 220-240V~ 50-60Hz
Power: 7.3-9.5W