Page 9 of 12
4.6 Fan Modes
The Fan has three modes being “NOR” (normal), “NAT” (natural) and “SLP” (sleep).
With the Fan running in “NOR” mode, press the “MODE” button and the mode will change
to “NAT”.
Press the “MODE” button again and the mode will change to “SLP” mode.
Press the “MODE” button again, and it will cycle back around to the “NOR” mode.
4.6.1 Normal Mode “NOR”
The Normal Mode is set by default when the unit is first turned on. The wind remains
a constant flow.
4.6.2 Natural Mode “NAT”
The Natural mode creates variable wind patterns so as to simulate the variable winds
that you would experience outdoors.
In this mode the speed of the fan continually cycles through a mixed selection of low,
medium, high and off in set intervals.
Depending on which Fan Speed is selected, the wind pattern will be different.
4.6.3 Sleep Mode “SLP”
The Sleep mode creates wind patterns that are the same as the Natural Mode wind
patterns. However, when the fan is set to either Medium or High Speed, the pattern
will drop a speed level after approximately 30 minutes.
For Example: If High Speed Fan and the Sleep Mode are selected, this will be the
same wind pattern as High Speed setting in Natural Mode. However, after
approximately 30 minutes, the wind pattern will automatically drop down to the same
wind pattern as if Natural Mode was selected at Medium fan speed.
After approximately a further 30 minutes, the wind pattern will automatically drop
down to the same wind pattern as if Natural Mode was selected at low fan speed.
The fan will continue to run in the Low Speed Natural Mode until it is manually turned
off.
Note: To have the fan automatically turn off at your desired time in this mode, use
the “Timer” function to select the auto off timer.
To Next Page
Loading...
