9
OPERATION
When operated for the first time, the unit may emit an unpleasant
burning type smell. This is normal, and will disappear after a
short period of use. Always choose a safe location for the heater,
keeping in mind the safety precautions outlined. Ensure that all
packaging has been removed from the unit before use.
• Place the heater on a level, hard and heat resistant surface.
• Plug the power cord into a suitable 240V~50Hz wall outlet.
• Open the control panel cover.
• Turn on the On/Off switch, the fire illumination effect will be
activated.
• Select the desired function:
• Rotate Thermostat control knob clockwise or anti-clockwise to
achieve desired room temperature.
• Half power 900W, turn on Heating I switch
• Full power 1800W (both heating I and heating II switches
activated simultaneously)
• Increase or decrease the fire illumination effect by rotating the
fire adjustable dial until desired intensity is reached.
Warning: The heating element box and fan air intake / outlet
is positioned underneath the heater.This area gets hot during
operation and should not be operated under , near or on
top of flammable materials such as curtains drapes , other
non -heat resistant materials like Carpet , Vinyl , floating or
Timber floors that could discolor or be permanently damaged
as a result of accidental airflow obstruction , position
heater on heat board between heater and non-heat resistant
substrate. Do not insert or allow foreign objects to enter
any grille opening as this may cause an electric shock , fire
or damage the heater, contact with the elements inside the
heater could result in electric shock.
To Next Page
Loading...