8
1. Place the heater upside down on a soft cloth or carpet (To
avoid causing any damage during assembly of the feet).
2. Position the feet to align with the corresponding holes location
on the base of the heater, secure with screws supplied and
tighten them with screw driver.
CONTROL PANEL
Adjustable
thermostat
knob
ON/OFF
switch
Heating
setting
switch
Flame
adjustment
knob
1. Adjustable thermostat knob
2. ON/OFF switch
3. Heating Setting Switch
I: Half power 900W, turn on Heating I switch
I & I I: Full power 1800W (both heating I and heating II switches
activated simultaneously)
4. Adjustable fire illumination control
To Next Page
Loading...