EasyManua.ls Logo

anko TT-1201XK - User Manual

anko TT-1201XK
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ELECTRIC UNDER BLANKET
KING FITTED
MODEL NO: TT-1201XK
INSTRUCTION MANUAL
PLEASE READ THESE INSTRUCTIONS
CAREFULLY AND RETAIN FOR
FUTURE REFERENCE
SAFETY INSTRUCTION
Carefully read this manual in full before using this electric blanket
Ensure that you know how the electric blanket functions and how to operate it.
Maintain the electric blanket in accordance with the instructions to ensure that it functions properly.
Keep this manual with the electric blanket. If the electric blanket is to be used by a third party,
this instruction manual must be supplied with it.
The safety instructions do not by themselves eliminate any danger completely and proper
accident prevention measures must always be used.
No liability can be accepted for any damage caused by non-compliance with these instructions or
any other improper use or mishandling.
Warning! Do not use this electric blanket if it has been damaged in any way, if it is wet or
moist or if the supply cord is damaged. Return it immediately to the retailer. Electric blankets
should be checked annually for electrical safety in order to limit the risk of electric shock or fire.
PACKAGE CONTENTS
1 x 179cm x 200cm Dual Control Electric Blanket
1 x Instruction Manual
Caution! Confirm all parts before disposing of packaging. Safely dispose of all plastic bags and
other packaging components. They may be potentially dangerous to children.
OPERATION
Location and Use
Use the blanket as an under blanket only. This blanket is designed for domestic use only. This
blanket is not intended for medical use in hospitals and/or nursing homes.
Fitting
Place the blanket on the bed, with the controller at the pillow end, ensuring that the blanket
does not overhang the bed edge. Fit the blanket to the bed using the attached skirt. Secure
each corner and also the middle. Ensure the blanket is fully flat on the mattress and not bent or
wrinkled.
Operation
Once the electric blanket has been installed correctly in position and the bedding completed,
connect the controller supply plug to a suitable power outlet. Ensure the controller is set to
“Off” before plugging in. Select the desired heat setting on the controller. The indicator lamp
indicates that the blanket is ON.
Controls
The controller has the following settings.
L LOW HEAT
M MEDIUM HEAT
H HIGH (PRE HEAT).
There is a LED light which illuminates when the blanket is switched ON.
IMPORTANT! The electric blanket is fitted with an automatic timer to switch OFF the
blanket after 12 hours of continuous use on any one of the heat settings (i.e. Low,
Medium or High). The auto power OFF function is re-activated for 12 hours each
time the controller is switched OFF and switched back ON again by selecting any
one of the heat settings. The 12 hour timer is automatic and cannot be adjusted
manually.
SAFE OPERATION GUIDE
● Fit the blanket securely on the mattress with the skirt.
● Use this blanket as an under blanket only. Not recommended for futons or similar folding
bedding systems.
● When not in use, pack the blanket in its original packaging for best protection and store in
a cool, clean and dry location. Avoid pressing sharp creases into the blanket. Store the
blanket only after it has fully cooled down.
● When storing, fold neatly but not tightly (or roll) in the original packaging without sharp
bends in the heating element and store where no other objects will be placed on top of it.
● Do not crease the blanket by placing items on top of it during storage.
Warning! The blanket should not be used on an adjustable bed.
Warning! The blanket must be fitted securely to the mattress with the fitted skirt.
Warning! The cord and control must be outside the bedding at all times and away from
other heat sources such as heating and lamps.
Warning! Do not use folded, rucked, creased or when damp.
Warning! Use HIGH setting to pre heat the bed 1 hour before use only. Do not sleep with the
control set to the high setting. It is highly recommended that the blanket be set to a minimum
Low heat if used overnight or for continuous use.
Caution: First Time Use. For first time use it is recommended that the blanket be set on HIGH
for 2 hours before sleeping on the bed. This will assist in drying any moisture out of the
mattress. Ignore any initial odour that may occur with first time use.
Warning! Do not sleep with the controller set to HIGH. Use HIGH setting only to pre heat
the bed then reduce the heat setting to minimum LOW setting overnight or preferably switched
OFF for safety.
Warning! Remember to switch the blanket controller to “OFF” at the end of use and
disconnect from mains power. Do not leave on indefinitely. There may be a risk of fire.
Warning! For added safety it is recommended that this blanket be used with a residual
current safety device (safety switch) with a rated residual operating current not exceeding
30mA. If unsure please consult a qualified electrician.
IMPORTANT SAFETY INFORMATION
When using electric appliances always observe safety regulations where applicable to reduce
the risk of fire, electric shock and personal injury.
Always check that the power supply corresponds to the voltage on the rating plate on the
controller.
Warning! Do not use the electric blanket folded . Do not use the electric blanket
rucked. Avoid creasing the blanket. Do not insert pins into the electric blanket.
DO NOT use this electric blanket if it is wet or has suffered water splashes.
Warning! Do not use this electric blanket with an infant or child, or any other person
insensitive to heat and other very vulnerable persons who are unable to react to overheating.
Do not use with a helpless or incapacitated person or any person suffering from medical illness
0-3
such as high blood circulation, diabetes or high skin sensitivity.
Warning! Avoid extended use of this electric blanket at a high setting. This may result in skin
burns.
Warning! Avoid creasing the blanket. Examine the blanket frequently for signs of wear or
damage. If there are such signs or if the appliance has been misused, have it inspected by a
qualified electrical person prior to any further use or the product must be disposed.
Warning! This electric blanket is not intended for use in hospitals.
Warning! Do not use this electric blanket on or under any waterbed or mechanically
adjustable type of bed such as a bunk or sofa bed. Check to ensure that the controller and
supply cord cannot become trapped in any bed or bedding. Keep controller outside of the
bedding, as much as possible.
Warning! Use the correct size of blanket for the bed. Do not for example use a double
blanket on a single bed. Do not tuck the blanket in.
Warning! For electrical safety the electric blanket must only be used with the detachable
control unit supplied with the item. Do not use other attachments not supplied with the blanket.
Warning! For electrical safety the electric blanket must only be used with the detachable
control unit 030C supplied with the item. Do not use other attachments not supplied with the
blanket.
Warning! Do not use by children under the age of three.
Supply
This electric blanket must be connected to a suitable 220-240V~ 50Hz power supply. If using
an extension cord, ensure that the extension cord is of a suitable 10-amp power rating. Fully
unwind the supply cord when in use as a coiled cord may overheat.
Warning! Always unplug from the mains supply when not in use.
Supply cord and plug
If the supply cord or controller is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
Children
This blanket is not to be used by young children over the age of three unless the controls have
been preset by a parent or guardian or unless the child has been adequately instructed on how
to operate the controls safely. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the
appliance, concerning use of the appliance by a person responsible for their safety. Young
children should be supervised to ensure that they do not play with the appliance.
Warning! Not to be used by young children (0-3years) .
CLEANING
Warning! When not in use or before cleaning, always disconnect the blanket from the
mains power supply.
Spot Clean
Sponge the area with a neutral wool detergent or mild soap solution in lukewarm water.
Sponge with clean water and dry completely before re-use.
Hand Washing (Maximum temperature 40)
Disconnect the detachable cord from the blanket.
Immerse the blanket only (DO NOT ALLOW THE CONTROLLER TO COME IN CONTACT WITH
ANY LIQUIDS) in a lukewarm neutral detergent or mild soapy solution. Soak for five minutes,
remove from the solution, and gently squeeze the solution through the blanket. Rinse the
blanket thoroughly in clean luke warm water, gently squeeze and drain the excess water from
the blanket. DO NOT WRING THE BLANKET.
DRYING
Drape the blanket across a clothes line and drip dry.
DO NOT use pegs to secure the blanket in position.
DO NOT dry with a hair dryer or heater.
IMPORTANT! Ensure the controls are in position that will not allow dripping water to fall onto
any part of the controller.
Allow the blanket to dry thoroughly.
Connect the detachable cord to the connector on the blanket. Ensure the connector is properly
locked in place.
CAUTION! Electric Shock Hazard. Ensure the electric blanket and connector on the blanket
is completely dry, free of any water or moisture, before connecting to mains power.
Warning! During washing and drying the detachable cord must be disconnected or positioned
in a way to ensure that water does not flow into the switch or control unit.
Warning! Do not allow the supply cord or controller to be immersed in any liquids.
Warning! Do not wring the blanket
Warning! Do not dry clean this electric blanket. This may damage the heating
element or the controller.
Warning! Do not iron this blanket . Do not machine wash or machine dry.
WarningDo not tumble dry.
WarningDo not bleach.
STORAGE
IMPORTANT! Safety Check
This blanket should be checked annually by a suitably qualified person to ensure its safety and
suitability for use.
Store in a safe place
Warning! Before storage of this appliance allow it to cool down before folding.
When not in use store your blanket and instruction manual in a safe and dry place. Roll or
gently fold the blanket. Do not crease. Store in a suitable protective bag for protection. Do not
place items on the blanket when storing. Before re-use after storage it is recommended that the
blanket is checked by a suitably qualified person to eliminate the risk of fire or electric shock
through a damaged blanket.
Examine the appliance frequently for signs of wear or damage. If there are such signs or if the
appliance has been misused the blanket must be checked by a qualified electrical person for
electrical safety, before switching it on again.
TECHNICAL SPECIFICATIONS
Size 179cm × 200cm
220-240v~ 50Hz 2 × 60W
Dual controller 030C
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in materials and
workmanship for the period stated above, from the date of purchase, provided that the product
is used in accordance with accompanying recommendations or instructions where provided.
This warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where possible) for
this product if it becomes defective within the warranty period. Kmart will bear the reasonable
expense of claiming the warranty. This warranty will no longer apply where the defect is a
result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service Centre on
1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at
Kmart.com.au for any difficulties with your product. Warranty claims and claims for expense
incurred in returning this product can be addressed to our Customer Service Centre at 690
Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major
failure.
For New Zealand customers, this warranty is in addition to statutory rights observed under New
Zealand legislation.
- 2 - - 3 -
- 6 -- 5 -- 4 -
2018-9-18 Kmart订单 说明书(TT-1201XK) 145(W)x210(H)mm, 128g铜版纸,6page,折页
6mm
Question and Answer IconNeed help?

Do you have a question about the anko TT-1201XK and is the answer not in the manual?

Overview

This document provides the instruction manual for several models of Anko electric underblankets, including:

  • King Fitted (Model No: TT-1201XK)
  • Double Fitted (Model No: TT-1101XD)
  • Single Fitted (Model No: TT-601XS)
  • Queen Fleecy Fitted (Model No: TT-1101XQF)

The core function of these devices is to provide warmth as an underblanket, designed for domestic use. They are not intended for medical use in hospitals or nursing homes.

Technical Specifications:

  • King Fitted (TT-1201XK):
    • Size: 179cm x 200cm
    • Power: 220-240V~ 50Hz, 2 x 60W
    • Control: Dual controller 030C
  • Double Fitted (TT-1101XD):
    • Size: 139cm x 188cm
    • Power: 220-240V~ 50Hz, 2 x 55W
    • Control: Dual controller 030C
  • Single Fitted (TT-601XS):
    • Size: 91cm x 188cm
    • Power: 220-240V~ 50Hz, 60W
    • Control: Single controller 030C
  • Queen Fleecy Fitted (TT-1101XQF):
    • Size: 153cm x 200cm
    • Power: 220-240V~ 50Hz, 2 x 55W
    • Control: Dual controller 030C

All models feature a 12-month warranty.

Usage Features:

  • Fitting: The blanket is designed to be placed on the mattress with the controller at the pillow end. It must be fitted securely to the mattress using the attached skirt, ensuring it lies fully flat without bends or wrinkles. It should not overhang the bed edge.
  • Operation: After correct installation, the controller's supply plug is connected to a suitable power outlet. Users must ensure the controller is set to "Off" before plugging it in. The desired heat setting (Low, Medium, or High) is selected on the controller, and an indicator lamp illuminates when the blanket is ON.
  • Heat Settings:
    • L: LOW HEAT
    • M: MEDIUM HEAT
    • H: HIGH (PRE HEAT)
    • The HIGH setting is recommended for pre-heating the bed for 1 hour before use. It is strongly advised not to sleep with the control set to HIGH; instead, reduce it to a minimum LOW setting for overnight or continuous use, or preferably switch it OFF for safety.
  • Automatic Timer: All models are equipped with an automatic timer that switches OFF the blanket after 12 hours of continuous use on any heat setting. This auto power OFF function reactivates for 12 hours each time the controller is switched OFF and then back ON by selecting a heat setting. The 12-hour timer is automatic and cannot be manually adjusted.
  • First Time Use: For initial use, it is recommended to set the blanket on HIGH for 2 hours before sleeping. This helps dry out any moisture from the mattress. Any initial odor that may occur is normal.
  • Safety Recommendations:
    • Always switch the controller to "OFF" and disconnect from mains power after use.
    • Do not leave the blanket on indefinitely due to fire risk.
    • It is recommended to use the blanket with a residual current safety device (safety switch) with a rated residual operating current not exceeding 30mA for added safety.
    • Do not use the electric blanket if it is folded, rucked, creased, damp, wet, or if the supply cord is damaged.
    • Do not insert pins into the blanket.
    • Do not use with an infant or child, or any person insensitive to heat, or other vulnerable persons unable to react to overheating (e.g., those with high blood circulation, diabetes, or high skin sensitivity, or those suffering from medical illness, or helpless/incapacitated persons).
    • Avoid extended use at a high setting to prevent skin burns.
    • Do not use on an adjustable bed, waterbed, or mechanically adjustable beds (bunk or sofa beds).
    • Ensure the controller and supply cord are not trapped in bedding and are kept outside the bedding as much as possible.
    • Use the correct size blanket for the bed.
    • Only use the detachable control unit supplied with the item (030C for all models).
    • Not for use by children under the age of three unless controls are preset by a parent/guardian or the child is adequately instructed.
    • Not for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a responsible person.
    • If using an extension cord, ensure it has a suitable 10-amp power rating and is fully unwound.
    • If the supply cord or controller is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person.

Maintenance Features:

  • Cleaning (Spot Clean):
    • Always disconnect the blanket from the mains power supply before cleaning.
    • Sponge the affected area with a neutral wool detergent or mild soap solution in lukewarm water.
    • Sponge with clean water and dry completely before re-use.
  • Hand Washing (Maximum temperature 40°C):
    • Disconnect the detachable cord from the blanket.
    • Immerse the blanket (without the controller) in a lukewarm neutral detergent or mild soapy solution for five minutes.
    • Remove from the solution and gently squeeze the solution through the blanket.
    • Rinse thoroughly in clean lukewarm water, gently squeeze, and drain excess water.
    • DO NOT WRING THE BLANKET.
  • Drying:
    • Drape the blanket across a clothesline and drip dry.
    • DO NOT use pegs to secure the blanket.
    • DO NOT dry with a hairdryer or heater.
    • Ensure controls are positioned to prevent dripping water from falling onto any part of the controller.
    • Allow the blanket to dry thoroughly before connecting the detachable cord and plugging into mains power.
    • DO NOT dry clean, iron, tumble dry, bleach, machine wash, or machine dry the blanket. These actions may damage the heating element or controller.
  • Storage:
    • Allow the appliance to cool down completely before folding.
    • Store the blanket and instruction manual in a safe and dry place.
    • Roll or gently fold the blanket without creasing the heating element.
    • Store in its original packaging or a suitable protective bag.
    • Do not place other items on top of the blanket during storage.
    • Before re-use after storage, it is recommended that the blanket be checked by a suitably qualified person for electrical safety.
  • Safety Check: The blanket should be checked annually by a suitably qualified person to ensure its safety and suitability for use. Examine frequently for signs of wear or damage. If such signs exist or if the appliance has been misused, it must be checked by a qualified electrical person before further use.

anko TT-1201XK Specifications

General IconGeneral
Brandanko
ModelTT-1201XK
CategoryHeater
LanguageEnglish

Related product manuals