ANLU APW-VAP-110P User Manual

ANLU APW-VAP-110P

11 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

APW-VAP-110P

High Pressure Cleaner

Operator Manual

BEFORE OPERATING THIS APPLIANCE

PLEASE READ THESE INSTRUCTIONS CAREFULLY

Table of Contents

Questions and Answers:

R
reedshawnAug 5, 2025
Why doesn't my ANLU Pressure Washer pump reach the necessary pressure?
- A
  Amanda ShermanAug 5, 2025
  If your ANLU Pressure Washer pump isn't reaching the necessary pressure, start by cleaning the water inlet filter. Then, check that all supply connections are tight to prevent the pump from sucking air. Also, clear or replace any clogged or worn-out suction/delivery valves. If the unloaded valve is stuck, loosen and re-tighten the regulation screw. Finally, check and replace the lance nozzle if it's incorrect or worn out.
R
Robin HernandezAug 12, 2025
What to do if my ANLU APW-VAP-110P Pressure Washer will not start?
- L
  Latasha AndersonAug 12, 2025
  If your ANLU Pressure Washer won't start when switched on, first check the plug and socket to ensure they are well connected and not faulty. Also, verify that the main voltage is adequate, meeting the minimum requirement. If the pump is stuck, switch off the unit and let the motor cool for a few minutes. Lastly, if the thermal safety switch has tripped, leave the lance open.

ANLU APW-VAP-110P Specifications

General

Brand	ANLU
Model	APW-VAP-110P
Category	Pressure Washer
Language	English

Related product manuals

ANLU APW-VAP-130P

Preview: ANLU APW-VAP-150P

ANLU APW-VAP-150P

Preview: ANLU ABW-VAQ-90P

ANLU ABW-VAQ-90P