What to do if my ANLU APW-VAP-150P motor stops suddenly?
If the motor of your ANLU Pressure Washer stops suddenly, it's likely that the thermal safety switch has tripped because of overheating. Verify that the main voltage matches the specifications. Turn off the unit and allow it to cool down for a few minutes.
Why doesn't my ANLU APW-VAP-150P Pressure Washer reach the necessary pressure?
If your ANLU Pressure Washer isn’t reaching the necessary pressure, several factors could be the cause. The water inlet filter might be clogged; if so, clean it. The pump could be sucking air from loose connections or hoses; ensure all supply connections are tight. The suction or delivery valves might be clogged or worn out; clear or replace them. The unloaded valve might be stuck; try loosening and re-tightening the regulation screw. Finally, the lance nozzle might be incorrect or worn out; check and replace if necessary.
What to do if my ANLU APW-VAP-150P Pressure Washer has fluctuating pressure?
If you're experiencing fluctuating pressure with your ANLU Pressure Washer, it could be due to several reasons. The pump might be sucking air; check that hoses and connections are airtight. Alternatively, the valves might be dirty, worn out, or stuck; clean and replace them, or consult a dealer. Also, the pump seals may be worn out; clean and replace them, or consult a dealer.
How to fix ANLU APW-VAP-150P that won't start?
If your ANLU Pressure Washer won't start, there are a few potential causes. First, check the plug and socket to ensure they are well connected and not faulty. Also ensure that the main voltage is adequate. If the pump is stuck, switch off the unit and let the motor cool for a few minutes. If the thermal safety switch has tripped, leave the lance open.
What causes water leaking from the pump of ANLU APW-VAP-150P Pressure Washer?
Water leaking from the pump of your ANLU Pressure Washer is likely due to worn-out seals. Check and replace them, or consult a dealer.
Describes the versatile uses of the high-pressure washing machine for various cleaning tasks.
Provides essential initial steps and hints for the pressure washer, including automatic ON/OFF and bleeding the gun.
Guides on connecting hoses, checking filters, starting the machine, and basic operation.
Step-by-step instructions for safely turning off the unit and releasing system pressure.
Details on the color-coded spray nozzles, their patterns, pressure, and suitable applications.
Instructions for inspecting and maintaining the water inlet filter to prevent blockages.
Guidance on adding and using cleaning detergents with the pressure washer for enhanced cleaning.
Explanation on how to use and store the hose reel handle for convenience.
Recommendations for storing the machine in a frost-free environment and preparing it after storage.
Instructions on how to properly use the gun's safety lock to prevent accidental operation.
Methods for clearing debris from the nozzle using a cleaning pin or back-flushing water.
Key specifications of the high-pressure cleaner, including pressure, flow rate, and power.
Schematic representation of the electrical connections and components of the pressure washer.
Detailed guide on connecting the pressure cleaner to electrical power and water supply.
General| Brand | ANLU |
|---|---|
| Model | APW-VAP-150P |
| Category | Pressure Washer |
| Language | English |
To Next Page
