annke DN41R Quick Start Guide

DN41R/DN81R/DT41Y/DT81Y
How to add IP camera I21AE to DVR DT81Y?
1. Use phone to connect camera to network and make sure phone is able to see
camera's image.
Here is instruction.
http://support.annke.com/kb/index.php?action=artikel&cat=26&id=373&artlang=e
n
2. Connect DVR to router with cable.
Please make sure the router is the one which sends wifi to connect IP camera.
3. Go to camera management of DVR on TV to search camera's IP and add it to DVR
system.
4 Click + icon to add camera. The device Status will change to yellow triangle
(indicating user name and password wrong),
5.Click Edit to input the right password of the IP camera.
If you did not set a password for the camera, the default user name
is admin default password is admin+Verification code at bottom of camera.
Page 1 / 3
(c) 2020 Annke KB Team <support@annke.com> | 2020-07-11 14:21
URL: http://support.annke.com/kb/content/28/374/how-to-add-ip-camera-i21ae-to-dvr-dt81y.html

annke DN41R Specifications

General

Max. Recording Resolution	1080P
Hard Drive Capacity	Up to 6TB
Video Compression	H.264
USB Interface	2 USB 2.0
Power Supply	DC 12V
Video Input	4 CH
Video Output	HDMI, VGA
Analog HD Recording Resolution	1080P
Channel Type	Analog
Audio Input/Output	1 CH Input, 1 CH Output
Network Interface	RJ45
Operating Temperature	-10°C to 55°C
Operating Humidity	10% to 90%