annke DT81GB - User Manual

DT41GB/DT81GB/DT61GB
How to connect system by annke vision？
1.Only when system's P2P status is online, phone and computer can use system's
serial number to view on phone and computer.
Here is way to check system's P2P status.
Go to Menu--configuration--network.
If status is offline, pls refer to this link to make it online at first.
http://support.annke.com/kb/index.php?action=artikel&cat=21&id=224&artlang=e
n
(For different model No, the interface will be a little difference)
Page 1 / 17
(c) 2019 Annke KB Team <support@annke.com> | 2019-07-22 05:15
URL: http://support.annke.com/kb/content/55/376/how-to-connect-system-by-annke-vision%EF%BC%9F.html

Summary

System P2 P Status and Network Configuration

Navigating to Network Configuration

Access Menu > Configuration > Network to check P2P status.

Verifying P2 P Online Status

Confirm the system's P2P status is 'Online' for remote access.

Annke Vision App Setup and Device Addition

Downloading and Installing the Annke Vision App

Search for and install the Annke Vision app from Google Play or Apple Store.

Registering an Account in the App

Create a user account within the Annke Vision mobile application.

Locating Device Identification Information

Find the system's QR code, SN, and Verification Code on the device label.

Scanning QR Code to Add Device

Use the app's "Add Device" function to scan the system's QR code.

Manually Inputting System ID

Alternative method to add the device by manually entering its ID.

Finalizing Device Configuration and Viewing Live Video

Accessing Live Video Feed

View the live video stream from the connected device within the app.

Entering the Device Verification Code

Input the verification code found on the device label into the app.

annke DT81GB Specifications

General

Brand	annke
Model	DT81GB
Category	DVR
Language	English