Need help?Do you have a question about the annke DN41R and is the answer not in the manual?
General| Max. Recording Resolution | 1080P |
|---|---|
| Hard Drive Capacity | Up to 6TB |
| Video Compression | H.264 |
| USB Interface | 2 USB 2.0 |
| Power Supply | DC 12V |
| Video Input | 4 CH |
| Video Output | HDMI, VGA |
| Analog HD Recording Resolution | 1080P |
| Channel Type | Analog |
| Audio Input/Output | 1 CH Input, 1 CH Output |
| Network Interface | RJ45 |
| Operating Temperature | -10°C to 55°C |
| Operating Humidity | 10% to 90% |
Details FCC compliance, limits for Class A digital devices, and potential interference.
Covers CE marking, RoHS, WEEE, and Battery directives for European compliance.
States compliance with Industry Canada's standards for digital devices.
Highlights precautions to prevent serious injury or death if neglected.
Highlights precautions to prevent potential injury or material damage if neglected.
Description of the DVR's front panel components and indicators.
Description of the DVR's rear panel ports and connectors.
How to connect and use a USB mouse with the DVR.
Explanation of the soft keyboard and its buttons.
Procedures for powering the DVR on, off, and rebooting.
Initial setup process, including setting an admin password.
Initial device setup using the startup wizard.
Setting up the type of video input for each channel.
Navigating the setup wizard for initial device configuration.
Procedures for accessing and exiting the system.
How to log into the DVR using user credentials.
How to log out of the DVR system.
Steps for adding and integrating IP cameras into the system.
Process to activate IP cameras before adding them.
Adding detected IP cameras to the connection list.
Modifying basic settings for connected IP cameras.
Defining analog channel types (TVI, AHD/CVBS) before camera connection.
Overview of the live video feed from cameras.
Functions available within the live view interface.
Mouse controls for navigating and interacting with the live view.
Accessing common functions directly from the live view screen.
Customizing output interfaces, dwell times, and audio for live view.
Manually diagnosing and checking the video quality of analog channels.
Setting up parameters for PTZ camera control.
Configuring camera positions, movements, and sequences.
Saving specific camera positions for quick recall.
Recalling saved camera positions.
Defining sequences of preset points for camera movement.
Executing predefined patrol paths.
Recording and playing back custom camera movements.
Executing recorded camera movement patterns.
Setting horizontal scan boundaries for PTZ cameras.
Initiating a horizontal scan between defined limits.
Configuring automatic camera parking actions after inactivity.
Accessing the interface for direct PTZ camera manipulation.
Setting video and audio encoding parameters for recording.
Setting up schedules for automatic recording based on time or events.
Setting up recording triggered by motion detection events.
Configuring recording based on various VCA and alarm events.
Manually starting and stopping recording without a schedule.
Setting up special recording schedules for holidays.
Managing and grouping hard disk drives for storage.
Methods to protect recorded files from overwriting.
Accessing and viewing recorded video footage.
Quickly playing back recent recordings of a selected channel.
Searching and playing back recordings by date and time.
Searching and playing back recordings based on specific event types.
Using tags to locate specific moments in playback.
Intelligent playback that highlights motion or VCA events.
Playing back video associated with system log entries.
Playing back recordings in divided time segments simultaneously.
Playing back recorded files from external storage devices.
Additional playback features.
Reviewing playback one frame at a time.
Zooming into specific areas of the playback video.
Procedures for backing up recorded video data.
Backing up files found via normal video search.
Backing up files related to specific events.
Managing connected backup storage devices.
Configuring motion detection parameters and response actions.
Setting up alarms and responses for video signal loss.
Configuring alarms for tampering with the camera lens.
Managing system exceptions like HDD full or network disconnection.
Setting up alarms for objects crossing a virtual line.
Configuring alarms for objects entering a defined virtual region.
Setting up alarms for abnormal audio events.
Basic network configuration including IP address and DNS.
Advanced network configurations.
Setting up PPPoE for network access.
Enabling remote access via cloud services.
Setting up Dynamic DNS for remote network access.
Configuring the Network Time Protocol server for time synchronization.
Setting up Universal Plug and Play (UPnP) for network discovery.
Additional network settings like alarm hosts and multicast.
Configuring secure server and HTTP ports.
Setting up email notifications for events.
Monitoring real-time network activity.
Network diagnostic tools.
Testing network connectivity and performance.
Exporting captured network data.
Verifying the current network connection status.
Viewing detailed network usage statistics.
Preparing new hard disk drives for use.
Organizing HDDs into groups for storage management.
Assigning HDDs to specific storage groups.
Configuring HDD properties like redundancy or read-only.
Allocating specific storage quotas for cameras.
Monitoring the operational status of installed HDDs.
Viewing HDD self-monitoring data for failure prediction.
Scanning HDDs for defective sectors.
Setting up alarms for HDD errors or abnormal status.
Customizing on-screen display elements like date, time, and camera names.
Setting up zones to mask sensitive areas in video feeds.
Adjusting image settings like brightness, contrast, and sharpness.
Displaying detailed information about the DVR's hardware and software.
Searching and viewing system operation, alarm, and exception logs.
Managing IP camera configuration data.
Backing up and restoring DVR system configurations.
Updating the DVR's firmware.
Performing firmware upgrades using local storage.
Performing firmware upgrades via FTP.
Resetting the DVR to factory default configurations.
General device settings like language, resolution, and time.
Setting up Daylight Saving Time adjustments.
Additional miscellaneous settings.
Creating, editing, and deleting user accounts.
Process for creating new user accounts.
Removing existing user accounts.
Modifying parameters for existing user accounts.
Definitions of technical terms used in the manual.
Solutions for common issues and problems.
To Next Page
