Need help?Do you have a question about the annke DT41Y and is the answer not in the manual?
Setting up video encoding parameters like resolution, bitrate, and frame rate for recording.
Defining a schedule for automatic start and stop of recording based on time or events.
Setting up motion detection areas and configuring recording triggers based on detected motion.
Procedures for backing up recorded video files to external devices like USB drives.
Configuring motion detection parameters, including areas, sensitivity, and alarm actions.
Setting up detection for video loss on channels and configuring alarm response actions.
Configuring detection for video tampering, such as lens obstruction, and setting alarm responses.
Configuring rules for detecting objects crossing a virtual line, including direction and sensitivity.
Setting up intrusion detection zones and parameters to trigger alarms when objects enter specific areas.
Configuring detection for abnormal audio events, such as sudden sound intensity changes or loss.
Configuring basic network parameters like IP address, gateway, and DNS server.
Setting up advanced network features including PPPoE, DDNS, and Cloud P2P access.
Preparing newly installed Hard Disk Drives (HDDs) for use by initializing them.
Organizing and managing multiple HDDs into groups for optimized storage allocation.
Customizing On-Screen Display (OSD) elements like date, time, and camera name on video feeds.
Defining privacy mask zones to obscure specific areas of the camera view from recording.
To Next Page
General
