Need help?Do you have a question about the ANPVIZ H Series and is the answer not in the manual?
Information regarding the purpose, content, and limitations of the user manual.
Legal terms concerning product usage, risks, and company responsibilities.
Information regarding FCC compliance, limits for digital devices, and potential interference.
Specifies the two conditions for device compliance with FCC Part 15 rules.
Details EU compliance, WEEE directive, and battery disposal guidelines.
Essential safeguards to prevent serious injury or death during product operation.
Precautions to prevent potential injury or material damage during product use.
Lists the specific NVR models for which this manual is applicable.
Details the components and functions of the NVR's front panel, including indicators and buttons.
Describes the various connectors and ports available on the rear of the NVR.
Step-by-step guide for installing a hard disk drive into the NVR unit.
Estimates storage space usage based on recording bit rate for one channel per hour.
Guide to activating the NVR by setting an administrator password and network camera activation.
Explains how to set and use unlock patterns and password-based login.
Setting up output interfaces, audio, and alarm pop-up options for live view.
Arranging camera windows and controlling live view display.
Enabling channel-zero encoding to reduce bandwidth for remote viewing.
Configuring date, time, resolution, and other general system parameters.
Adding, editing, and managing user accounts and their permissions.
Setting up exception event hints and linkage actions for alerts.
Configuring IP address, DHCP, and DNS settings for network connectivity.
Enabling and configuring the Guarding Vision service for remote access.
Setting up email accounts for receiving event notifications.
Adding Hikvision or Anpviz H Series cameras using their device password.
Manually adding third-party ONVIF cameras using custom settings.
Rearranging the display order of camera channels by dragging windows.
Remotely upgrading network camera firmware via the NVR.
Adjusting advanced camera settings like IP address and password.
Customizing on-screen display elements like date format and camera name.
Configuring the NVR to detect moving objects and trigger alarms.
Defining specific regions for detection and setting sensitivity for alarms.
Setting up schedules for when detection events are active.
Defining actions to take when an alarm or exception occurs.
Initializing a newly installed hard disk drive for video recording.
Adding NAS or IP SAN disks as network HDDs for storage.
Setting up recording schedules triggered by events or continuous recording.
Detailed steps for creating or modifying recording schedules.
Setting main stream, sub-stream, frame rate, resolution, and bitrate for recordings.
Introduction to the playback interface and its controls.
How to play back normal video recordings from the NVR.
Playing back videos that contain specific event information like motion detection.
Clipping and exporting video segments to a backup device.
Guide to accessing the NVR remotely using the Guarding Vision mobile app.
Instructions for accessing and operating the NVR through a web browser interface.
Guide to installing and using the IVMS4200 client software for managing the NVR.
Information on downloading necessary software and manuals from the website.
Frequently asked questions and solutions for common operational issues.
General| Brand | ANPVIZ |
|---|---|
| Model | H Series |
| Category | Network Hardware |
| Language | English |
To Next Page
