Need help?Do you have a question about the ANPVIZ NVR108MH-P8 and is the answer not in the manual?
Steps to activate the NVR, set passwords, and activate cameras.
Configure IP, subnet mask, gateway, and DNS settings.
Add compatible cameras using their device password.
Set up motion detection zones, sensitivity, and target detection.
Initialize HDDs and manage storage device status.
General| Model | NVR108MH-P8 |
|---|---|
| Channels | 8 |
| Max Resolution | 8MP |
| VGA Output Resolution | 1920x1080 |
| Decoding format | H.265/H.264 |
| Two-way Audio | Yes |
| Hard Disk Interface | SATA |
| Consumption (without HDD) | ≤ 10W |
| Video Input | IP |
| HDD Bays | 1 |
| Video Output | HDMI, VGA |
| HDMI Output Resolution | 1920x1080 |
| Recording Resolution | Up to 8MP |
| Decoding capability | 8 channels |
| Audio Output | 1-channel RCA |
| Network Interface | 1 x RJ45 10/100/1000Mbps |
| PoE Interface | 8 Ports |
| USB Interface | 2 x USB 2.0 |
| Power Supply | DC 12V/2A |
| PoE | No |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Operating Humidity | 10% to 90% |
To Next Page
