Need help?Do you have a question about the ANPVIZ NVR216MH-P16 and is the answer not in the manual?
Step-by-step guide for installing HDDs and the NVR unit.
Set an admin password to activate the video recorder for first-time access.
Login methods including unlock pattern and password for accessing the device.
Configure network settings like DHCP, IP address, and DNS for network operation.
Enable remote access and management via Guarding Vision mobile app and platform.
Add compatible cameras using their device password, matching the recorder's password.
Manually add third-party ONVIF cameras by specifying IP address and protocol.
Enable and configure motion detection areas and sensitivity for event triggering.
Initialize and manage storage devices, including HDDs, for recording video data.
Steps to register and log in to the GuardingVision app for remote mobile access.
Access the NVR via a web browser by entering its IP address and logging in.
View live video and manage the camera with the IVMS4200 client software.
General| Model | NVR216MH-P16 |
|---|---|
| Video Input Channels | 16 |
| HDMI Output | 1 |
| VGA Output | 1 |
| Decoding Format | H.265/H.264 |
| PoE | Yes |
| Operating System | Embedded Linux |
| Video Output | HDMI, VGA |
| Max HDD Capacity | 10TB |
| Network Interface | 1 x 10/100/1000 Mbps |
| USB Interface | 2 USB 2.0 ports |
| Power Consumption | ≤ 15W |
| Operating Temperature | -10 °C to +55 °C (+14 °F to +131 °F) |
| Operating Humidity | 10% to 90% |
| Decoding Capability | 16-ch@1080P (2MP) |
| HDD Bays | 1 SATA interface |
| PoE Interface | 16 PoE ports (IEEE 802.3af) |
To Next Page
