EN
15
NOTE:
• If the display is in time mode during the
countdown, press ∨– to show data for
the countdown.
• When the required programme settings
are ready, press CLOCK to return to time
mode. The display returns to time mode
after 15 seconds if no buttons are
pressed.
RANDOM FUNCTION
1. The random function starts and stops the
connected appliance randomly.
– Shortest time switched o: 26 minutes
– Longest time switched o:42 minutes
– Shortest time switched on: 10 minutes
– Longest time switched on: 26 minutes
2. Plug the timer into a power point and set
to AUTO mode to start/stop the random
function.
3. Press RND to activate the random function.
The time switched o is from 26 to 42
minutes and the time switched on is from
10 to 26 minutes.
4. Deactivate the random function by
pressingRND once.
5. The random function disregards
programme settings for start and stop.
DISREGARDING
/
RESUMPTION OF
PROGRAMME SETTINGS
Press the ON/OFF button to disregard/resume
programme settings.
• ON: Disregards programme settings, the
connected appliance is on all the time.
• AUTO: The connected appliance starts and
stops according to the programme
settings.
• OFF: Disregards programme settings, the
connected appliance is o all the time.
NOTE:
• Programme settings and random
function are only active in AUTO mode.
• Programme settings and random
function are not active in countdown
mode.
• Programme settings and countdown
function are not active in random
function mode.
CONNECTION
1. Set the required programme settings as
described.
2. Switch of the appliance to be controlled.
3. Plug the appliance into the timer and
plug the timer into a power point.
4. Start the appliance.
5. The appliance starts and stops according
to the timer settings, if disregard is not
activated.
To Previous Page
Loading...