Anslut 006248 - Safety Instructions; Technical Specifications; Use; Button Functions

EN
12
TECHNICAL DATA
Rated voltage 230 V
~
50 Hz
Max load 1800W
Amperage Max 8 A
Protection rating IP44
Interval 1 min
USE
BUTTON FUNCTIONS
FIG. 1
CLOCK
• Press CLOCK to switch from programming
mode to show the time.
• Press CLOCK together with SET to set the
time and weekday.
• Press CLOCK together with ∨– to switch to
summertime.
CD
Press CD to start/stop countdown in AUTO mode.
RND
Press RND to start/stop random function in
AUTO mode.
ON/OFF
Press ON/OFF to switch between ON, AUTO
and OFF. Every time the button is pressed the
horizontal line moves between the markings
ON–AUTO–OFF on the casing.
SET
Press SET to set the time and weekday, or to
conrm the setting.
SAFETY INSTRUCTIONS
• For outdoor use.
• Do not connect two or more timers
together.
• Do not connect appliances that need a
current of more than 8A.
• Do not connect appliances with an output
of more than 1800 W.
• Always check that the plug on the
connected appliance is fully inserted into
the socket on the timer.
• If the timer needs cleaning, unplug it from
the mains and wipe it with a dry cloth.
• Do not immerse the timer in water or any
other liquid.
• Do not connect heaters and other similar
equipment to the timer.
• Check that the appliance to be controlled
is switched o before plugging it into the
timer.
IMPORTANT:
The timer must be placed in a vertical position
to maintain the protection rating IP44.
SYMBOLS
Approved as per
applicable directives.
Recycle discarded product
as electrical waste.