EasyManuals Logo

ANSMANN POWERLINE 4.2 PRO User Manual

ANSMANN POWERLINE 4.2 PRO
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Deutsch | English | Français | Italiano | Español
Svenska | Português | Nederlands | Russian
12
Read all information and safety instructions on the charger and on the rechargeable
batteries before using the charger.
The operating instructions for all other devices connected to the product must also
be read.
Always insert rechargeable batteries with the correct polarity (+ and -) as shown in
the charge slot.
Do not attempt to charge non-rechargeable batteries.
The product is categorised as protective class III. It has enhanced insulation
and for this reason requires no protective earth.
Use the product exclusively with the mains adapter supplied.
Always place the product on a level, stable and heat-resistant surface.
Do not use the product in the vicinity of combustible liquids or gases.
Do not cover the ventilation holes on the underside and sides of the product.
Do not leave the product unattended during use.
Use the product only in dry indoor rooms and protect it from moisture.
FUNCTIONAL OVERVIEW
Charger for 1-4 AAA, AA NiMH rechargeable batteries, incl. USB charge port (5V / max. 1A)
Single slot monitoring
Charging starts automatically once the batteries have been inserted with the
correct polarity
Microcontroller-monitored charge control
Automatic termination of the charge process once rechargeable batteries are fully
charged
Multifunction, clear LCD display with backlighting
Charge current can be individually set for each charge bay:
400mA, 600mA, 800mA when charging 1-4 rechargeable batteries
400mA, 600mA, 800mA, 1500mA, 1800mA when charging 1-2 rechargeable batteries
Individually selectable charge program for each charge bay:
CHARGE
DISCHARGE (Discharge - Charge: To minimise the "memory effect" of rechargeable
batteries)
REFRESH (Repeated discharging - charging: To revitalise old rechargeable batteries)
TEST (Charge - discharge to determine capacity - charge)
Capacity measurement in mAh/Ah
Simple identification of the respective selected charge program via the LCD display

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ANSMANN POWERLINE 4.2 PRO and is the answer not in the manual?

ANSMANN POWERLINE 4.2 PRO Specifications

General IconGeneral
Control typeButtons
Power source typeAC
Compatible battery sizesAA, AAA
Number of batteries supported4
Compatible battery technologiesNickel-Metal Hydride (NiMH)
Product colorBlack
Built-in displayYes
Display technologyLCD
Batteries included-
Input voltage100 - 240 V
Quantity per pack1 pc(s)

Related product manuals