Need help?Do you have a question about the Antari F-2 Fazer and is the answer not in the manual?
Details the onboard digital control interface and button functions for operating the machine.
Explains the pinout for 3-pin and 5-pin XLR DMX connectors used for connectivity.
Describes how to connect and operate the machine using a DMX controller or chain.
Details the DMX channel mapping for various functions like faze, fan speed, and timer.
General| Fluid Tank Capacity | 1.5 L |
|---|---|
| Output | 1, 000 cu.ft / min |
| Remote Control | Optional |
| Control | DMX, Manual |
| Warm-up Time | 5 Minutes |
| DMX Channels | 1 |
| Voltage | 110-240V, 50/60Hz |
To Next Page
