Need help?Do you have a question about the Antari Z-350 FAZER and is the answer not in the manual?
Describes operation using two rotary knobs located on the rear of the machine.
Details connecting the machine to a DMX controller using a 3-pin XLR connector.
Covers setting the DMX address using the DIP switch, noting it occupies 2 control channels.
Power| input voltage | 110-120V 60Hz, 220-240V 50Hz |
|---|---|
| fuse 100V | T6.3A 250V |
| fuse 110-120V | T7A 250V |
| fuse 220-240V | T4A 250V |
| heater power 100Vac | 520W |
| heater power 120Vac | 800W |
| heater power 220Vac | 600W |
| heater power 240Vac | 730W |
Operating Environment| warm-up time | 3.5-4 min |
|---|---|
| max operating time | 7.2 hrs |
Performance| coverage volume | 3000 cu.ft./min. |
|---|---|
| fluid consumption | 3 ml/min. |
Fluid| fluid tank capacity | 1.3 l |
|---|---|
| compatible fluid | Antari FLG water-based fluid |
Control and Connectivity| control option | DMX 512, Cable remote, Manual |
|---|---|
| dmx channels | 2 channels |
| power connection | IEC |
| dmx data connection | 3-pin XLR |
| remote control connection | 3.5mm headphone jack |
Dimensions and Weight| dimensions | L 320 x W 153 x H 391 mm, L 12.59 x W 6.02 x H 15.30 inch |
|---|---|
| dry weight | 8.82 kg |
To Next Page
