Excessive dust and build up liquid residue will reduce the performance and cause overheat.
12.1 Breaker Reset
Please follow the instructions below to reset the breaker;
Step 1. Disconnect AC power
Step 2. Flip break back to position
Step 3. Turn on machine for testing
**If the breaker still jumps off after reset, please contact your local Antari dealer for
assistance.
Breaker Specification
120V = 15A 250V
240V = 7A 250V
13. Technical Specifications
US Model: AC 100-120V, 50/60Hz 13.0A
EU Model: AC 220-240V, 50/60Hz 6.5A
Antari FLP Fire Training Fog Fluid
0°C – 40°C (32°F – 104°F)
Manual、Timer、DMX512、Wireless、Cable Remote (Optional)
XLR 5-Pin Connector (DMX)、Neutrik powerCON Connector (Power)
L 580 W 279 H 331 mm (L 22.83 W 10.99 H 13.03 inch)
14. Warranty Disclaimer
We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period
of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our
factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any
purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise
which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its
performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated
contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in
connection with the use, sale, or repair of any merchandise purchased from us.
To Next Page
Loading...
