Need help?Do you have a question about the Antec EARTHWATTS and is the answer not in the manual?
Antec's high-efficiency power supply units (PSU) with cutting-edge technology and energy-efficient design.
Compatibility with ATX12V v2.3/EPS12V v2.91, Universal Input, and Active Power Factor Correction (Active PFC).
Industrial-grade safety circuitry including OVP, SCP, and OCP to protect the computer.
Certification for high power supply efficiency, ensuring cooler operation, quietness, and longer lifespan.
Certification for use with high-end graphics cards for superior parallel graphics processing.
System using direct-connected mandatory cables and modular connectors to reduce clutter and improve airflow.
Details on the maximum amps distributed on each rail for different voltages and output regulation.
Explanation of four separate +12V power rails and their allocation to connectors for balanced power distribution.
Install the EA-750 PSU into the computer case using the four provided screws.
Connect the 24-pin main power connector to the motherboard; detach 4-pin for 20-pin connectors.
Connect the 8-pin or 4-pin connector for the CPU, removing socket cover if necessary.
Connect cables from the pack to the PSU as needed, noting PCI-E cable placement.
Connect the heavy-duty AC power cord and set the power switch to the ON position.
General| Series | Earthwatts |
|---|---|
| Cooling | 120mm fan |
| Input Voltage | 100-240V |
| Form Factor | ATX |
| Main Connector | 20+4 Pin |
| Connectors | Varies by model |
| Type | ATX12V |
| PCI-Express Connector | Varies by model |
| SATA Power Connector | Varies by model |
| 4-Pin Molex Connector | Varies by model |
| Floppy Drive Connector | Varies by model |
| Wattage | 650W, 750W |
| Modular | No |
| +12V Rails | Single |
| Protection | Over Voltage, Under Voltage, Over Power, Short Circuit |
To Next Page