Anthem MRX 310 Assembly Instructions

STEP 1
Repeat step for other bracket.
STEP 2
MRX 310/510/710 RACK MOUNT KIT
ASSEMBLY INSTRUCTIONS FOR RACK-MOUNTING YOUR NEW MRX RECEIVER
ANTHEM DOES NOT SUPPLY THE SCREWS FOR
ATTACHING THE RACK MOUNT TO THE RACK
CABINET. USE HARDWARE SPECIFIED OR PROVIDED
BY THE RACK UNIT MANUFACTURER.
RACK MOUNT KIT: 1.25 lb / 0.57 kg
ALL SCREWS MUST BE USED IN ORDER TO FULLY SUPPORT THE WEIGHT OF YOUR NEW MRX RECEIVER.
PARTS INCLUDED:
• 2 Rack Mounting Brackets (L&R)
• 1 Crosspiece
• 11 Screws
NOT INCLUDED:
• Rack Mount Cabinet
IMPORTANT: BRACKETS MUST BE ATTACHED TO MRX RECEIVER BEFORE SLIDING UNIT INTO THE RACK MOUNT CABINET.
MAN0094 | 091713
Crosspiece should be attached
before MRX is installed in rack.

Anthem MRX 310 Specifications

General

HDMI in	7
Composite video in	1
Digital audio coaxial in	2
Digital audio optical in	3
Video upscaling	Yes
Supported video modes	1080p
AirPlay	-
Apple docking	No
Product color	Black
Audio decoders	DTS, Dolby Digital Plus, Dolby TrueHD
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	400 W
Supported radio bands	AM, FM
Phono inputs (RCA)	5
Connectivity technology	Wired
Speakers connectivity type	RCA
Receiver type	Surround
Frequency range	10 - 30000 Hz
Audio output channels	5.0 channels
Signal-to-Noise Ratio (SNR)	101 dB
Total Harmonic Distortion (THD)	0.04 %
Power output per channel (20-20KHz@8 Ohm)	60 W

Weight and Dimensions

Depth	372 mm
Width	439 mm
Height	164 mm
Weight	12600 g