Need help?Do you have a question about the Anthem MRX520 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Power Output (8 ohms, 20 Hz - 20 kHz, 0.1% THD, Two Channels Driven) | 100 W |
| Power Output (8 ohms, 20 Hz - 20 kHz, 0.1% THD, Five Channels Driven) | 80 W |
| HDMI Outputs | 2 |
| HDMI 2.0a | Yes |
| HDCP 2.2 | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Room Correction | Anthem Room Correction (ARC) |
| Zone 2 | Yes |
| Bluetooth | No |
| USB Port | Yes |
| Phono Input | No |
| ARC (Audio Return Channel) | Yes |
| eARC (Enhanced Audio Return Channel) | Yes |
| 4K Ultra HD Pass-through | Yes |
| HDR (High Dynamic Range) | Yes |
| Dolby Vision | Yes |
| HLG (Hybrid Log-Gamma) | Yes |
| Weight (kg) | 13.6 |
| Network Connectivity | Ethernet |
| Weight | 13.6 kg |
| HDMI Inputs | 7 (1 front, 6 rear) |
Provides critical safety advice, explains hazard symbols, and details general precautions.
Lists all included items and essential checks before connecting the receiver.
Identifies and explains the controls and indicators on the front of the unit.
Details all input, output, and connection ports on the rear of the unit.
Guides on connecting video sources and displays via HDMI.
Details on connecting various audio sources using digital and analog methods.
Instructions on how to properly connect speakers to the amplifier outputs.
Explains how to use the front panel or remote to navigate setup menus.
Guides on configuring speaker types, sizes, and profiles.
Details on setting crossover frequencies for optimal bass distribution.
Procedures for calibrating speaker output levels for balanced sound.
Details on running the ARC measurement for room calibration.
Basic controls for turning the unit on/off and adjusting volume.
Methods for choosing between different audio and video sources.
To Next Page
