Need help?Do you have a question about the Anthem MRX 310 and is the answer not in the manual?
General| HDMI in | 7 |
|---|---|
| Composite video in | 1 |
| Digital audio coaxial in | 2 |
| Digital audio optical in | 3 |
| Video upscaling | Yes |
| Supported video modes | 1080p |
| AirPlay | - |
| Apple docking | No |
| Product color | Black |
| Audio decoders | DTS, Dolby Digital Plus, Dolby TrueHD |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 400 W |
| Supported radio bands | AM, FM |
| Phono inputs (RCA) | 5 |
| Connectivity technology | Wired |
| Speakers connectivity type | RCA |
| Receiver type | Surround |
| Frequency range | 10 - 30000 Hz |
| Audio output channels | 5.0 channels |
| Signal-to-Noise Ratio (SNR) | 101 dB |
| Total Harmonic Distortion (THD) | 0.04 % |
| Power output per channel (20-20KHz@8 Ohm) | 60 W |
Weight and Dimensions| Depth | 372 mm |
|---|---|
| Width | 439 mm |
| Height | 164 mm |
| Weight | 12600 g |
Check the package contents and retain invoice for warranty service. Ensure all listed items are present.
Important notices regarding power cord, temperature, and manual updates. Check website for latest information.
Detailed diagram and explanation of the receiver's front panel buttons and display functions.
Diagram and list of all rear panel input and output terminals for the MRX 710 model.
Diagram and list of all rear panel input and output terminals for the MRX 310 model.
Guide to the buttons and functions of the remote control for operating the receiver.
Illustrations and advice for optimal 5.1 and 7.1 channel speaker placement for best audio performance.
Details on HDMI, Component Video, and Composite Video connections for audio and video signals.
Explanation of digital and analog audio inputs/outputs, including HDMI Audio Return Channel.
Instructions for connecting speaker wire to the receiver's binding posts, including banana plug usage.
Connecting AM/FM antennas and setting up the Local Area Network for ARC and IP control.
Connecting 12 Volt triggers, external IR receivers/emitters, and the main power cord.
Settings for HDMI color depth, video output, scaling, and on-screen info display for connected displays.
Configuring speaker profiles, back amplifier assignments, and front bi-amp settings.
Setting crossover frequencies for different speaker types to optimize bass distribution.
Entering speaker distances from the listening area for proper sound staging and timing.
Using test noises and SPL meter for calibrating individual speaker output levels.
Configuring input names, video/audio sources, speaker profiles, and listening modes.
Adjusting mute levels, maximum volume, power-on volume, and recording output settings.
Configuring IP settings, device name, and trigger controls for networked operation.
Setting the brightness level for the front panel display and adjusting wake-up brightness.
Power saving modes, CEC control, tuner step settings, and standby options.
Saving current configurations, loading previous settings, and resetting to factory defaults.
Viewing software versions, ARC name, MAC address, and instructions for USB software updates.
Ensuring compatibility, checking network setup, and preparing the computer and receiver for ARC.
Step-by-step instructions for installing the Anthem Room Correction software from CD or web download.
Assembling the microphone stand and positioning the microphone correctly for accurate measurements.
Guidance on conducting room measurements, ensuring quiet conditions, and saving measurement data.
Editing target curves and applying measurement settings in manual mode for advanced users.
Fine-tuning subwoofer equalization, high-pass order, and minimum EQ frequency.
Instructions on how to print graphs and target curves generated by the ARC software.
Checking for and installing the latest versions of the ARC software from the Anthem website.
Operating the main and Zone 2 power, and adjusting volume levels via front panel or remote.
Controlling Zone 2 playback, input selection, and volume independently from the main zone.
Switching between audio/video inputs and operating the AM/FM tuner, including preset storage.
On-the-fly adjustment of speaker channel levels, bass, treble, and balance.
Correcting audio/video synchronization issues by adjusting the lip-sync delay.
Selecting and understanding various surround sound listening modes for different content types.
Controlling Dolby Volume for consistent loudness and adjusting front panel display brightness.
Viewing song info, resolution, audio input, and software versions on the display.
Detailed specifications for output, frequency response, THD+N, and S/N ratio.
Information on voltage requirements, power consumption in various modes, and dimensions.
Details on the warranty duration, coverage, voiding conditions, and service procedures.
Explanation that international terms are handled by authorized distributors, not Anthem directly.
Crucial safety warnings regarding electrical shock, water exposure, and servicing.
Guidelines on where to locate the unit, ventilation requirements, and avoiding environmental hazards.
To Next Page
