Need help?Do you have a question about the Anthem MRX 510 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| HDMI Outputs | 2 |
| Network Connectivity | Ethernet, Wi-Fi |
| Zone 2 | Yes |
| Phono Input | Yes |
| IMAX Enhanced | No |
| Amplifier Output (8 ohms) | 100W |
| HDMI Inputs | 7 |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Room Correction Technology | Anthem Room Correction (ARC) |
| Inputs | HDMI, Optical, Coaxial, RCA, Phono |
| Outputs | HDMI |
| Video Support | 4K |
| Power Output (per channel) | 100W (8 ohms, two channels driven) |
Covers electrical shock risks, handling precautions, and warning symbols.
Specifies unsuitable locations to avoid heat, moisture, dust, and vibration.
Information on responsible disposal of electronics and batteries according to regulations.
Checklist of included items and instructions for reporting discrepancies to the dealer.
Important operational guidelines, including power cord handling and temperature considerations.
Identifies and describes the functions of buttons and the display on the front panel.
Detailed diagram and list of all input and output ports on the MRX 710 model.
Detailed diagram and list of all input and output ports on the MRX 310 model.
Explains the purpose of each button on the remote control for operating the receiver.
Illustrates typical 5.1 and 7.1 channel speaker placement for optimal sound quality.
Describes HDMI, Component, and Composite video connection types and their capabilities.
Details digital and analog audio connections, HDMI ARC, and preamp outputs.
Instructions for connecting speakers using speaker wire and banana plugs correctly.
Covers Antenna, Network, 12V Trigger, IR, and Power connection types.
Settings for color depth, video output resolution, and signal scaling options.
Configuring speaker assignments, profiles, and bi-amplification options for sound.
Setting crossover frequencies for speakers and subwoofers to optimize bass distribution.
Adjusting speaker distances from the listening area for precise audio timing.
Matching speaker output levels using test noises for balanced sound reproduction.
Configuring sources, naming inputs, and selecting sound processing modes for playback.
Adjusting mute levels, maximum volume, power-on volume, and REC outputs.
Configuring network type, IP address, and IR input/output behavior for control.
Adjusting front panel display brightness and wake-up behavior for visibility.
Power saving, IP control, CEC functionality, and tuner step settings for the receiver.
Storing and recalling user configurations, and resetting to factory defaults.
Viewing software versions, MAC address, and performing USB firmware updates.
Ensuring software compatibility and network setup for initiating Anthem Room Correction.
Assembling the stand and positioning the microphone for accurate acoustic measurements.
Step-by-step guide to performing room acoustic measurements for calibration.
Editing EQ targets and customizing response curves after the initial measurement.
Fine-tuning subwoofer crossover order and EQ frequency for optimal bass performance.
Generating measurement reports and updating the Anthem Room Correction software.
Managing main and Zone 2 power and adjusting audio volume levels.
Controlling audio playback and input selection in the secondary listening zone.
Switching between connected audio and video sources using the receiver.
Tuning AM/FM stations, setting preferences, and storing favorite presets.
On-the-fly adjustment of speaker/subwoofer levels and tone controls (bass/treble).
Adjusting audio delay for video sync and selecting various sound processing modes.
Controlling dynamic range, Dolby Volume, and front panel display brightness.
Viewing system information like audio/video status and software versions.
To Next Page
