Name: Anthem MRX 510
Brand: Anthem
Rating: 4 (1 reviews)

To Next Page

STEP 1

Repeat step for other bracket.

STEP 2

MRX 310/510/710 RACK MOUNT KIT

ASSEMBLY INSTRUCTIONS FOR RACK-MOUNTING YOUR NEW MRX RECEIVER

ANTHEM DOES NOT SUPPLY THE SCREWS FOR

ATTACHING THE RACK MOUNT TO THE RACK

CABINET. USE HARDWARE SPECIFIED OR PROVIDED

BY THE RACK UNIT MANUFACTURER.

RACK MOUNT KIT: 1.25 lb / 0.57 kg

ALL SCREWS MUST BE USED IN ORDER TO FULLY SUPPORT THE WEIGHT OF YOUR NEW MRX RECEIVER.

PARTS INCLUDED:

• 2 Rack Mounting Brackets (L&R)

• 1 Crosspiece

• 11 Screws

NOT INCLUDED:

• Rack Mount Cabinet

IMPORTANT: BRACKETS MUST BE ATTACHED TO MRX RECEIVER BEFORE SLIDING UNIT INTO THE RACK MOUNT CABINET.

MAN0094 | 091713

Crosspiece should be attached

before MRX is installed in rack.

Other manuals for Anthem MRX 510

Questions and Answers:

Need help?

Do you have a question about the Anthem MRX 510 and is the answer not in the manual?

General

Channels	7.2
HDMI Outputs	2
Network Connectivity	Ethernet, Wi-Fi
Zone 2	Yes
Phono Input	Yes
IMAX Enhanced	No
Amplifier Output (8 ohms)	100W
HDMI Inputs	7
Audio Formats Supported	Dolby TrueHD, DTS-HD Master Audio
Room Correction Technology	Anthem Room Correction (ARC)
Inputs	HDMI, Optical, Coaxial, RCA, Phono
Outputs	HDMI
Video Support	4K
Power Output (per channel)	100W (8 ohms, two channels driven)