Anthem MRX 710 Assembly Instructions

STEP 1
Repeat step for other bracket.
STEP 2
MRX 310/510/710 RACK MOUNT KIT
ASSEMBLY INSTRUCTIONS FOR RACK-MOUNTING YOUR NEW MRX RECEIVER
ANTHEM DOES NOT SUPPLY THE SCREWS FOR
ATTACHING THE RACK MOUNT TO THE RACK
CABINET. USE HARDWARE SPECIFIED OR PROVIDED
BY THE RACK UNIT MANUFACTURER.
RACK MOUNT KIT: 1.25 lb / 0.57 kg
ALL SCREWS MUST BE USED IN ORDER TO FULLY SUPPORT THE WEIGHT OF YOUR NEW MRX RECEIVER.
PARTS INCLUDED:
• 2 Rack Mounting Brackets (L&R)
• 1 Crosspiece
• 11 Screws
NOT INCLUDED:
• Rack Mount Cabinet
IMPORTANT: BRACKETS MUST BE ATTACHED TO MRX RECEIVER BEFORE SLIDING UNIT INTO THE RACK MOUNT CABINET.
MAN0094 | 091713
Crosspiece should be attached
before MRX is installed in rack.

Anthem MRX 710 Specifications

General

Channels	7.2
HDMI Outputs	2
Dolby Atmos	No
DTS:X	No
Network Connectivity	Ethernet
ARC	Yes
4K Passthrough	Yes
Wi-Fi	No
Bluetooth	No
USB Port	Yes
Phono Input	No
Amplifier Power (8 ohms)	140W
Audio Processing	Dolby TrueHD, DTS-HD Master Audio
HDMI Inputs	7
Room Correction	Anthem Room Correction (ARC)
Dimensions (W x H x D)	17.25 x 6.5 x 14.5 inches
Power Output per Channel	140W
Weight	30.6 lbs (13.9 kg)