6
Wi-Fi Capability
The 26V LP4 Gold Mount Plus Charger comes standard with an
integrated Wi-Fi module to be utilized with a variety of features and
functions released in upcoming software revisions. The integrated
Wi-Fi module will also be used for future battery compatibility,
so new batteries may be used on the 26V LP4 Gold Mount Plus
Charger as they are released.
Mini USB Port
Located at the back, this port is used to upgrade the firmware of the
26V LP4 Gold Mount Plus Charger. For information, please contact
the Anton/Bauer Customer Support Group.
AC Mains Power
The AC Mains power connector is located on the rear of the charger.
USB Connector for Flash Drive Port
Located at the back, this port can also be used to upgrade the
firmware of the 26V LP4 Gold Mount Plus Charger utilizing a Flash
Drive. For information, please contact the Anton/Bauer Customer
Support Group..
Components and Connections
To Next Page
