Anton/Bauer Dionic 26V LP4 Gold Mount Plus - Attaching a Battery to the Charger; To Release the Battery

7
Attaching a Battery to the Charger
To attach a battery to either the Gold Mount on the charger:
1. Slide the battery onto the adaptor, ensuring the Gold Mount
T-stud is aligned in the corresponding slots.
2. The battery is fully engaged when the latch makes an audible
“click”.
Components and Connections
1
2
To Release the Battery
1. Depress the latch and hold.
2. Slide the battery off the connector.
1
2