ANTOR 4LD640 - User Manual

Questions and Answers

L
Lauren Rhodes MDAug 11, 2025
Why ANTOR 4LD640 Engine does not start?
- W
  Willie ChandlerAug 11, 2025
  Several factors might prevent your ANTOR Engine from starting. It could be due to dirt or water in the fuel system, requiring you to clean the fuel filter, fuel pipe, and hose, and change the fuel. Another cause might be air in the fuel system, which can be resolved by bleeding the air. Also, not enough fuel in the tank can cause interruption in fuel delivery. Add fuel and check the fuel hose and filter for obstructions, cleaning if necessary.
M
Michael RamirezAug 17, 2025
What to do if my ANTOR 4LD640 Engine does not start because of fuel problems?
- M
  Mrs. Tracy ThompsonAug 17, 2025
  If your ANTOR Engine won't start due to fuel-related issues, consider these possibilities. The fuel might be too thick, so use Diesel fuel up to the specifications. There might be an interruption in fuel delivery. Ensure there's enough fuel in the tank; if not, add fuel. Also, inspect the fuel hose and filter for any obstructions and clean them if needed.
K
Krista RobinsonAug 23, 2025
How to fix improper fuel injection in ANTOR 4LD640?
- A
  annmcdanielAug 23, 2025
  If your ANTOR Engine isn't starting because of improper fuel injection, start by cleaning the injector nozzle and injection pump. If cleaning doesn't solve the problem, you may need to replace the injector and pump.
Q
qchambersAug 29, 2025
What to do if ANTOR Engine does not start due to insufficient compression pressure?
- B
  Brian FisherAug 29, 2025
  If your ANTOR Engine won't start due to insufficient compression pressure, ensure that the cylinder head nuts are properly tightened in the correct order and to the specified torque. Also, check the cylinder head gasket for leaks. If a new cylinder head gasket is used, retighten the cylinder head nuts to the correct torque before starting the engine.
C
Carol ThomasSep 4, 2025
How to solve incomplete combustion that prevents ANTOR 4LD640 from starting?
- E
  Eric RodriguezSep 5, 2025
  If incomplete combustion is preventing your ANTOR Engine from starting, the injector nozzle may be clogged and needs cleaning. Also, the injection angle could be incorrect, or the cylinder head gasket might be leaking, leading to insufficient compression pressure. Check all related parts to resolve the issue.