Need help?Do you have a question about the Antra AH6-260 Series and is the answer not in the manual?
Warns about eye injury from arc rays, hot sparks, and the need for proper eye protection.
Alerts to fire and explosion risks from sparks, hot parts, and closed containers.
Details hazards of welding fumes/gases and necessary precautions for health.
Warns about eye injury from flying metal, sparks, and slag during welding.
Advises caution when touching hot parts to prevent burns after welding.
Highlights risks of hearing damage from noise and the need for ear protection.
Guides on adjusting headband for circumference, height, and angle for optimal fit.
Explains adjusting headband width and height for a secure and comfortable fit.
Emphasizes correct setting of adjustment knob and grind/weld switch before use.
Solutions for filter not darkening or flickering issues, checking sensors and batteries.
General| Model | AH6-260 Series |
|---|---|
| Category | Welding Accessories |
| Type | Auto-Darkening Welding Helmet |
| Arc Sensors | 2 |
| Light State | DIN 4 |
| Dark State | DIN 9-13 |
| Sensitivity | Adjustable |
| Grinding Mode | Yes |
| Viewing Area | 3.86" x 1.73" |
| Shade Range | DIN 9-13 |
| Switching Time | 1/25000 sec |
| Delay Time | 0.1-1.0 sec |
| Power Supply | Solar + Lithium Battery |
| Power Source | Solar + Battery |
| Operating Temperature | -10 to 60°C |
| Weight | 1.1 lbs |
| Standards | ANSI Z87.1 |
To Next Page
