Need help?Do you have a question about the Antra AntFi X60 Series and is the answer not in the manual?
General| Brand | Antra |
|---|---|
| Model | AntFi X60 Series |
| Category | Welding Accessories |
| Language | English |
Warnings about arc rays, and the need for proper eye protection and protective clothing.
Warnings about welding causing fire or explosion due to sparks and hot materials.
Chemical warnings related to California Proposition 65 for cancer and birth defects.
Hazards from welding fumes and gases, and precautions to take.
Risks of fire and explosion from welding processes, sparks, and hot materials.
Hazards of flying metal during welding and need for eye protection.
Risks of severe burns from hot parts and need for cooling.
Risks of hearing damage from noise and need for ear protection.
Product capabilities, limitations, and suitable welding processes.
Explanation of the standard markings found on the product.
Precautions for warming the helmet in extreme cold before welding.
Inspecting for damage and precautions for skin allergies.
Warnings against placing helmet on hot surfaces or tampering with filters.
Adjusting headband for circumference, height, and viewing angle.
Adjusting headband width and height for individual preference.
Solar unit automatically switches ON when exposed to light.
How to select shade numbers for welding and grinding modes.
Setting the switch to grind mode and resetting it after use.
Adjusting the delay time for lens lightening after welding.
Fine-tuning sensitivity for optimal response to welding arcs.
Procedures to test the auto darkening lens and battery status.
How to determine if battery replacement is needed based on LED indicators.
Steps for safely replacing the batteries in the filter.
Instructions for removing and installing the inner cover lens.
Steps to remove the front cover lens retainer from the shield.
Procedure for removing and installing the auto darkening filter cartridge.
Steps for replacing the exterior cover lens on the welding filter.
Importance of inspecting filter glass and cover lenses for damage.
Guidelines for cleaning the helmet and welding filter components.
Common issues like filter not darkening or flickering and their solutions.
Details on the product warranty, limitations, and exclusions.
Recommendations for product usage duration and factors affecting it.
To Next Page
