Need help?Do you have a question about the Antx DiaLog Elite and is the answer not in the manual?
General| Brand | Antx |
|---|---|
| Model | DiaLog Elite |
| Category | Industrial Equipment |
| Language | English |
Manual is for operations technicians responsible for installing and configuring DiaLog Elite hardware.
Guide is divided into chapters describing the Modbus Master Interface Option.
Describes how to program Modbus Master Interface settings using the device's front panel keypad.
Explains how to configure the Modbus Master Interface remotely using a phone connection.
Explains how Elite channels mapped to PLC registers can be configured for alarms, control, or status.
Details configuration parameters for Digital Input channels within the Modbus interface.
Details configuration parameters for Analog Input channels within the Modbus interface.
Details configuration parameters for Relay Output channels within the Modbus interface.
Describes how the display shows alarms and how to view specific alarms on the Elite.
Details the '06 Communication' alarm indicating a loss of communication with the Modbus slave.
Explains how I/O channel alarms are displayed and navigated, showing channel status and condition.
Describes how to use the View option from the RUN mode screen to confirm proper PLC/Modbus I/O reading.
To Next Page