User Manual
15
Press [OK] key to save system time. Press [C] key to cancel and exit to upper menu.
2.5.1.3 Calibration
In [System], press [ IN] or [OUT] key to select [Calibration] option.
Press [OK] key to enter the time setting (Time unit: second).
You can press [ IN] or [OUT] key to get the calibration time you need. And press [OK]
to confirm. Then you can continue to do other function settings.
2.5.1.4 Language
In [System], press [ IN] or [OUT] key to select [Language] option.
Press [OK] key to enter language setting interface.
You can press [ IN] or [OUT] key to switchover the language. And press [OK] to
confirm.
Then you can continue to do other function settings. And press [C] key to enter setting
save interface.
To Next Page
Loading...
Need help?
General
