• If there is an unusual noise or the temperature becomes very high
during inflating, please turn off the inflator immediately.
• Before setting the inflation pressure value, make sure the pressure
unit is correctly selected. Mixing up psi and bar could lead to
dangerous overinflation.
• Unit conversion: 1bar = 14.5psi, 1bar = 100kPa.
• Do not leave the inflator unattended while it is in operation.
• Please use the product in a dry and clean environment. The intrusion
of sand and dust may cause damage to the product. Don’t wash the
product with water.
• Please use a certified 5V/3A adapter and the included charging cable
to charge this product. Malfunction caused by actions not in
accordance with the above requirements is not covered by the
warranty.
• After running for a long time, the temperature of the junction between
the air tube and the main body can become very high. To avoid burns,
avoid touching it.
• This inflator is equipped with short-circuit protection. Do not connect
its USB-A port with its USB-C port.
• Caution: To reduce the risk of electric shock, do not expose to rain.
Store it indoors.
SAFETY INSTRUCTIONS
To Next Page