Anytek Q2 - System Settings and Functions; Accessing System Menu; Customizing System Parameters; Display and Sensor Settings

3
2. Disconnect it to Power source.
Function
System
1.Press to enter the menu
2.Press the in the menu
3.Press the Ok for reset the following iterms:
1).Beep of button: on/off
2).Vol: off/high/mid/low
3).Time: dd/mm/yy，hh/mm/ss
4).Language: English/简体中文/繁体中文
5).Frequency: 50Hz/60Hz
6).Display off: Off/1min/3min，factory default:Off
7).G-sensor Sensitivity:Off/high/mid/low，factory default:Off
8).System : Y/N ;Note: Y means factory default
9).WIFI: On/Off
10).Format: Y/N.
11).Software Version: AT-2018XXXX
12).WIFI Code: ANTK_XXXX,Note: Different model,
different code
Video
1. Shooting