To Next Page

To Previous Page

OSD Setting

Basic and simple instruction on the control keys.

Luminance

Contrast 50

Brightness 80

Eco Mode Standard

Gamma Gamma1

DCR Off

HDR Mode

Off

Color Setup Picture Boost OSD Setup

ExitExtra

Game Setting

1). Press the MENU-button to activate the OSD window.

2). Press Left or Right to navigate through the functions. Once the desired function is highlighted,

press the MENU-button to activate it, press Left or Right to navigate through the sub-menu

functions. Once the desired function is highlighted, press MENU-button to activate it.

3). Press Left or to change the settings of the selected function. Press to exit. If you want to adjust

any other function, repeat steps 2-3.

4). OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and

then press power button to turn the monitor on. To unlock the OSD - press and hold the MENU-

button while the monitor is off and then press power button to turn the monitor on.

Notes:

1). If the product has only one signal input, the item of “Input Select” is unable to be adjusted.

2). If the input signal resolution is the native resolution or Adaptive-Sync, then the item “Image Ratio” is

invalid.

3). ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only

one state can exist.

Questions and Answers:

Need help?

Do you have a question about the AOC 24G4 and is the answer not in the manual?

AOC 24G4 Specifications

General

Color gamut	103 %
Pixel pitch	0.2745 x 0.2745 mm
Screen shape	Flat
Display diagonal	23.8 \
Display technology	-
Native aspect ratio	16:9
Maximum refresh rate	180 Hz
NTSC coverage (typical)	113 %
Viewable size, vertical	296.46 mm
sRGB coverage (typical)	126 %
Contrast ratio (dynamic)	80000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.7 million colors
Viewable size, horizontal	527.04 mm
Display brightness (typical)	300 cd/m²
High Dynamic Range (HDR) supported	Yes
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)
HDCP version	2.2
DisplayPort version	1.4
Input current	1.5 A
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	- W
Power consumption (typical)	23 W
Pivot angle	-90 - 90 °
Tilt angle range	-5 - 23 °
Panel mounting interface	100 x 100 mm
Package depth	189 mm
Package width	613 mm
Package height	477 mm
Package weight	6460 g
Feet color	Black/Red
Certification	BSMI / KC / KCC / e-Standby / RCM / MEPS / CE / CB / FCC
Product color	Black, Red
Front bezel color	Black
Market positioning	Gaming
Cables included	DisplayPort
DisplayPort cable length	1.8 m

Weight and Dimensions