AOC 7F User Manual

AOC 7F
2
v2_123102
AOC 7F
For Your Safety
FCC Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy, and if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment
and receiver.
3. Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
Notice
1. The changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
2. Shielded interface cables and AC power cord, if
any, must be used in order to comply with the
emission limits.
3. The manufacturer is not responsible for any
radio or TV interference caused by unauthorized
modification to this equipment. It is the
responsibility of the user to correct such
interference.
As an ENERGY STAR
®
Partner, Envision
Peripherals, Inc. has determined that this product
meets the ENERGY STAR
®
guidelines for energy
efficiency.
Warning
To prevent fire or shock hazard, do not expose the
monitor to rain or moisture. Dangerously high
voltage is present inside the monitor. Do not open
the cabinet. Refer servicing to qualified personnel
only.

AOC 7F Specifications

General

Brand	AOC
Model	7F
Category	Monitor
Language	English

Summary

Safety and Compliance

FCC Statement

Compliance with FCC Rules for digital devices and radio frequency energy.

General Notices and Warnings

Important notices regarding modifications, cables, and general safety warnings.

Precautions and General Advice

Installation and Usage Precautions

Advice on water, ventilation, power, and avoiding overloading.

Servicing and Safety

Importance of qualified servicing and avoiding internal hazards.

Product Information and Setup

General Notes and Features

Advice on monitor care, handling, and overview of general features.

Power Cord and Package Contents

Details on the supplied power cord and a list of items included in the package.

Monitor Installation and Connections

Installing & Removing the Base

Step-by-step guide for attaching and detaching the monitor base.

Connecting Supplied Power Cord

Instructions for connecting the monitor using the supplied power cord and video cable.

Connecting Optional Power Cord

Guidance on using an optional power cord with specific connectors.

Operating Instructions

Front Panel Controls

Explanation of the monitor's buttons and indicators.

Adjusting OSD Settings

Detailed guide on using the On-Screen Display to adjust picture settings.

Monitor Features and Drivers

Information on Plug & Play and installing Windows drivers.

Technical Support

Troubleshooting Common Issues

Solutions for common problems like no power, fuzzy picture, or color defects.

Appendix - Specifications

Monitor Specifications

Technical details including CRT size, dot pitch, resolution, and power source.

Appendix - Environmental and Cable Info

Environmental Considerations and Signal Cable

Operating temp/humidity, and signal cable type.

Appendix - Timing and Pinout

Factory Preset Timing Table

Table listing standard resolutions and corresponding horizontal/vertical frequencies.

Connector Pin Assignment

Details the pinout for the 15-pin color display signal cable.